DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
58
5-4 disable authen_policy
Description
This command is used to disable system access authentication policy.
Disable system access authentication policy. When authentication is disabled, the device will
adopt the local user account database to authenticate the user for login, and adopt the local
enable password to authenticate the enable password for promoting the user‘s privilege to Admin
level.
Format
disable authen_policy
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable system access authentication policy:
5-5 show authen_policy
Description
This command is used to display that system access authentication policy is enabled or disabled.
Format
show authen_policy
Parameters
None.
Restrictions
Only Administrators can issue this command.
To Next Page
Loading...
