D-Link DGS-3000 series - Page 622

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
618
DGS-3000-26TC:admin#disable snmp traps
Command: disable snmp traps
Success.
DGS-3000-26TC:admin#
69-26 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3000-26TC:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3000-26TC:admin#
69-27 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.