DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
629
DGS-3000-26TC:admin#show sim neighbor
Command: show sim neighbor
Neighbor Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
70-4 reconfig
Description
This command is used to re-telnet to member.
Format
reconfig {member_id <value 1-32> | exit}
Parameters
member_id - (Optional) Specifies the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - (Optional) Specifies to exit from the telnet session.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To re-telnet to member:
DGS-3000-26TC:admin#reconfig member_id 1
Command: reconfig member_id 1
DGS-3000-26TC:admin#
70-5 config sim_group
Description
This command is used to configure group information.
To Next Page
Loading...
