DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
634
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To upload configuration:
DGS-3000-26TC:admin#upload sim_ms configuration_to_tftp 10.55.47.1
D:\configuration.txt members 1
Command: upload sim_ms configuration_to_tftp 10.55.47.1 D:\configuration.txt
members 1
This device is uploading configuration. Please wait several minutes ...
Upload Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-1A-2D-00-12-12 Success
70-9 config sim trap
Description
This command is used to control sending of traps issued from the member switch.
Format
config sim trap [enable | disable]
Parameters
enable - Enable the trap state.
disable - Disable the trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable sim trap:
DGS-3000-26TC:admin#config sim trap enable
Command: config sim trap enable
Success.
To Next Page
Loading...
