D-Link DGS-3000 series - Page 655

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
651
DGS-3000-26TC:admin#config system_severity trap warning
Command: config system_severity trap warning
Success.
DGS-3000-26TC:admin#
73-2 show system_severity
Description
This command is used to display the severity level controls for the system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show severity level control for system:
DGS-3000-26TC:admin#show system_severity
Command: show system_severity
System Severity Trap : warning(4)
System Severity Log : information(6)
DGS-3000-26TC:admin#