D-Link DGS-3000 series - Page 72

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
68
Example
To add an authentication server host to an server group:
DGS-3000-26TC:admin#config authen server_group mix_1 add server_host 10.1.1.222
protocol
tacacs+
Command: config authen server_group mix_1 add server_host 10.1.1.222 protocol
ta
cacs+
Success.
DGS-3000-26TC:admin#
5-18 delete authen server_group
Description
This command is used to delete a user-defined authentication server group.
Format
delete authen server_group <string 15>
Parameters
<string 15> - The user-defined server group name. This value can be up to 15 characters long.
Restrictions
Only Administrators can issue this command.
Example
To delete a user-defined authentication server group:
DGS-3000-26TC:admin#delete authen server_group mix_1
Command: delete authen server_group mix_1
Success.
DGS-3000-26TC:admin#
5-19 show authen server_group
Description
This command is used to display the authentication server groups.
Format
show authen server_group {<string 15>}