D-Link DGS-3000 series - Page 80

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
76
Restrictions
Only Administrators can issue this command.
Example
To configure the administrator password:
DGS-3000-26TC:admin#config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3000-26TC:admin#
5-29 create accounting method_list_name
Description
This command is used to create a user-defined list of accounting methods for accounting services
on the Switch. The maximum supported number of accounting method lists is 8.
Format
create accounting method_list_name <string 15>
Parameters
<string 15> - Specifies the built-in or user-defined method list.
Restrictions
Only Administrators can issue this command.
Example
To create a user-defined accounting method list called “shell_acct”:
DGS-3000-26TC:admin#create accounting method_list_name shell_acct
Command: create accounting method_list_name shell_acct
Success.
DGS-3000-26TC:admin#
5-30 config accounting
Description
This command is used to configure a user-defined or default method list of accounting methods.