D-Link xStack DGS-3620 Series - Page 101

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
96
DGS-3620-28PC:admin#create tacacs+ server_host 10.1.1.211 port 15555 timeout 10
key "abc123"
Command: create tacacs+ server_host 10.1.1.211 port 15555 timeout 10 key
"abc123"
Success.
DGS-3620-28PC:admin#
4-52 config tacacs+ server_host
Description
This command is used to configure the TACACS+ server host.
Format
config tacacs+ server_host <ipaddr> {port <int 1-65535> | [key [<key_string 254> | none] |
encryption_key <key_string 344>] | timeout <int 1-255>}
Parameters
<ipaddr> - Enter the IP address of the server host.
port - (Optional) The port number of the TACACS+ server host.
<int 1-65535> - Enter the value between 1 and 65535. The default value is 49.
key - (Optional) Specifies the key for TACACS+.
<key_string 254> - Enter the plain text key string for TACACS+.
none - No encryption for RADIUS.
encryption_key - (Optional) The encrypted form key string for TACACS+. The encryption
algorithm is based on DES.
<key_string 344> - Etner the string with maximum 344 characters.
timeout - (Optional) Specifies the time in second to wait for the server to reply.
<int 1-255> - Enter the value between 1 and 255. The default value is 5.
Restrictions
Only Administrator level can issue this command.
Example
To configure the TACACS+ server host:
DGS-3620-28PC:admin#config tacacs+ server_host 10.1.1.211 key "abcd123"
Command: config tacacs+ server_host 10.1.1.211 key "abcd123"
Success.
DGS-3620-28PC:admin#
4-53 create xtacacs server_host
Description
This command is used to