EasyManua.ls Logo

D-Link xStack DGS-3620 Series - Page 1258

D-Link xStack DGS-3620 Series
1371 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1253
Format
traceroute6 [<ipv6addr> | <domain_name 255>] {ttl <value 1-60> | port <value 30000-64900>
| timeout <sec 1-65535> | probe <value 1-9>}
Parameters
<ipv6addr> - Enter the IPv6 address of the destination end station.
<domain_name 255> - Enter the domain name of the destination end station. This name can be
up to 255 characters long.
ttl - (Optional) Specifies the time to live value of the trace route request.
<value 1-60> - Enter the time to live value of the trace route request. This is the maximum
number of routers that a trace route packet can pass while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops. The default value is 30.
port - (Optional) Specifies the port number.
<value 30000-649000> - Enter the port number. The value range is from 30000 to 64900. The
default is 33435.
timeout - (Optional) Specifies the timeout period while waiting for a response from the remote
device.
<sec 1-65535> - Enter the timeout period while waiting for a response from the remote device.
A value of 1 to 65535 seconds can be specified. The default is 5 seconds.
probe (Optional) Specifies the number of probes.
<value 1-9> - Enter the number of probes. The range is from 1 to 9. If unspecified, the default
value is 1.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To trace the IPv6 routed path between the Switch and 3000::1 with probe 3:
DGS-3620-28PC:admin# traceroute6 3000::1 probe 3
Command: traceroute6 3000::1 probe 3
<10 ms 1345:142::11
<10 ms 1345:142::11
<10 ms 1345:142::11
<10 ms 2011:14::100
<10 ms 2011:14::100
<10 ms 2011:14::100
<10 ms 3000::1
Trace complete.
DGS-3620-28PC:admin#
Trace the IPv6 routed path between the switch and 1210:100::11 with port 40000:
DGS-3620-28PC:admin# traceroute6 1210:100::11 port 40000
Command: traceroute6 1210:100::11 port 40000
<10 ms 3100::25
<10 ms 4130::100
<10 ms 1210:100::11

Table of Contents

Related product manuals