D-Link xStack DGS-3620 Series - Page 223

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
218
Example
This example displays the BGP reflection setting:
DGS-3620-28PC:admin# show bgp reflection
Command: show bgp reflection
Client to Client Reflection State : Disabled
Cluster ID : 0.0.0.0
Router Reflector Client:
10.1.1.20
10.1.1.30
DGS-3620-28PC:admin#
12-50 show bgp confederation
Description
This command is used to display the confederation configuration of BGP.
Format
show bgp confederation
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
This example displays the BGP confederation setting:
DGS-3620-28PC:admin# show bgp confederation
Command: show bgp confederation
BGP as number : 65501
Confederation identifier : 10
Confederation Peer : 65502,65503
Neighbor list:
IP address Remote AS number
--------------- --------------------
192.168.1.1 65502
192.168.1.2 65503
192.168.1.3 65501
DGS-3620-28PC:admin#