D-Link xStack DGS-3620 Series - Page 671

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
666
53-35 download address_binding snoop_entry_fromFTP
Description
This command is used to download the DHCPv4 snooping binding entries from an FTP server.
Format
download address_binding snoop_entry_fromFTP [<ipaddr> {tcp_port <tcp_port_number 1-
65535>} filename <path_filename 64> | ftp: <string
user:pasword@ipaddr:tcpport/path_filename>]
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
tcp_port - (Optional) Specifies the TCP port number for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number used here. This value must be
between 1 and 65535.
filename - Specifies the file name and path that will be downloaded.
<path_filename 64> - Enter the file name and path here. This can be up to 64 characters
long.
ftp: - Specifies the FTP connection details.
<string user:pasword@ipaddr:tcpport/path_filename> - Enter the FTP connection details
here. For example, john:123456@172.18.211.41:21/image/dhcpsnp.cfg.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Examples
This example show how to download the DHCP snooping binding table by FTP.
DGS-3620-28PC:admin# download address_binding snoop_entry_fromFTP 10.0.0.1
tcp_port 21 filename impb.cfg
Command: download address_binding snoop_entry_fromFTP 10.0.0.1 tcp_port 21
filename impb.cfg
Connecting to server................... Done.
User(Anonymous): john
Pass:******
Download DHCPv4 Snooping binding table................. Done.
Success.
DGS-3620-28PC:admin#
This example show how to download the DHCP snooping binding table by FTP using a string.