D-Link xStack DGS-3620 Series - Page 672

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
667
DGS-3620-28PC:admin#download address_binding snoop_entry_fromFTP ftp:
Tony:123456@10.54.71.1:21/cfg/dhccpsnp.cfg
Command: download address_binding snoop_entry_fromFTP ftp:
john:123456@10.54.71.1:21/cfg/dhccpsnp.cfg
Connecting to server................... Done.
Download DHCPv4 Snooping binding table................. Done.
Success.
DGS-3620-28PC:admin#
53-36 upload address_binding snoop_entry_toFTP
Description
This command is used to upload the DHCPv4 snooping binding entries to an FTP server.
Format
upload address_binding snoop_entry_toFTP [<ipaddr> {tcp_port <tcp_port_number 1-
65535>} filename <path_filename 64> | ftp: <string
user:pasword@ipaddr:tcpport/path_filename>]
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
tcp_port - (Optional) Specifies the TCP port number for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number used here. This value must be
between 1 and 65535.
filename - Specifies the file name and path that will be uploaded.
<path_filename 64> - Enter the file name and path here. This can be up to 64 characters
long.
ftp: - Specifies the FTP connection details.
<string user:pasword@ipaddr:tcpport/path_filename> - Enter the FTP connection details
here. For example, john:123456@172.18.211.41:21/image/dhcpsnp.cfg.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Examples
This example show how to upload the DHCP snooping binding table by FTP.