Digisol DG-FS4526 User Manual

DG-FS4526 User Manual
1-7
1
www.digisol.com
Port Configuration Admin Status Enabled
Auto-negotiation Enabled
Flow Control Disabled
Rate Limiting Input limits Disabled
Port Trunking Static Trunks None
LACP (all ports) Disabled
Broadcast Storm
Protection
Status Enabled (all ports)
Broadcast Limit Rate 5k octets per second
Spanning Tree
Algorithm
Status Enabled, RSTP
(Defaults: All values based on IEEE 802.1w)
Fast Forwarding (Edge Port) Disabled
Address Table Aging Time 300 seconds
Virtual LANs Default VLAN 1
PVID 1
Acceptable Frame Type All
Ingress Filtering Enabled
Switchport Mode (Egress Mode) Hybrid: tagged/untagged frames
GVRP (global) Disabled
GVRP (port interface) Disabled
Traffic Prioritization Ingress Port Priority 0
Weighted Round Robin Queue: 0 1 2 3
Weight: 1 2 4 8
IP DSCP Priority Disabled
IP Precedence Priority Disabled
IP TOS Priority Disabled
IP Port Priority Disabled
IP Settings IP Address DHCP assigned, otherwise 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
DHCP Client: Enabled
BOOTP Disabled
Table 1-2 System Defaults (Continued)
Function Parameter Default

Digisol DG-FS4526 Specifications

General

Brand	Digisol
Model	DG-FS4526
Category	Switch
Language	English