Digisol DG-FS4526 - Voice Vlan Aging; Voice Vlan Mac-Address

DG-FS4526 User Manual
4-271
4
www.digisol.com
voice vlan aging
This command sets the Voice VLAN ID time out. Use the no form to restore the
default.
Syntax
voice vlan aging minutes
no voice vlan
minutes - Specifies the port Voice VLAN membership time out.
(Range: 5-43200 minutes)
Default Setting
1440 minutes
Command Mode
Global Configuration
Command Usage
The Voice VLAN aging time is the time after which a port is removed from the
Voice VLAN when VoIP traffic is no longer received on the port.
Example
The following example configures the Voice VLAN aging time as 3000 minutes.
voice vlan mac-address
This command specifies MAC address ranges to add to the OUI Telephony list. Use
the no form to remove an entry from the list.
Syntax
voice vlan mac-address mac-address mask mask-address [description
description]
no voice vlan mac-address mac-address mask mask-address
• mac-address - Defines a MAC address OUI that identifies VoIP devices in
the network. (For example, 01-23-45-00-00-00)
• mask-address - Identifies a range of MAC addresses. (Range:
80-00-00-00-00-00 to FF-FF-FF-FF-FF-FF)
• description - User-defined text that identifies the VoIP devices.
Default Setting
None
Command Mode
Global Configuration
Console(config)#voice vlan aging 3000
Console(config)#