Digisol DG-FS4526 - Show Cluster Candidates; Show Cluster Members; Upnp Commands

Command Line Interface
4-318
4
www.digisol.com
show cluster members
This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
show cluster candidates
This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
UPnP Commands
Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.
Console#show cluster members
Cluster Members:
ID: 2
Role: Active member
IP Address: 10.254.254.3
MAC Address: 00-17-7c-0a-e2-f1
Description: DG-FS4552
Console#
Console#show cluster candidates
Cluster Candidates:
Role Mac Description
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER 00-17-7c-0a-e5-51 DG-FS4552
CANDIDATE 00-17-7c-0a-e2-f1 DG-FS4552
Console#
Table 4-1. UPnP Commands
Command Function Mode Page
upnp device Enables/disables UPnP on the network GC
4-319
upnp device ttl Sets the time-to-live (TTL) value. GC 4-319
upnp device advertise
duration
Sets the advertisement duration of the device GC 4-320
show upnp Displays UPnP status and parameters PE 4-320