Digisol DG-FS4526 - Show Web-Auth Summary; Web-Auth Re-Authenticate (IP)

Command Line Interface
4-120
4
www.digisol.com
web-auth re-authenticate (IP)
This command ends the web authentication session associated with the designated
IP address and forces the user to re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-26)
• ip - IPv4 formatted IP address.
Default Setting
None
Command Mode
Privileged Exec
Example
show web-auth summary
This command displays a summary of web authentication port parameters and
statistics.
Syntax
show web-auth summary
Default Setting
None
Command Mode
Privileged Exec
Console#web-auth re-authenticate interface ethernet 1/2 192.168.1.5
Failed to reauth port.
Console#