Digisol DG-FS4526 User Manual

DG-FS4526 User Manual
4-269
4
www.digisol.com
Example
show policy-map interface
This command displays the service policy assigned to the specified interface.
Syntax
show policy-map interface interface input
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-12)
Command Mode
Privileged Exec
Example
Voice VLAN Commands
The switch allows you to specify a Voice VLAN for the network and set a CoS priority
for the VoIP traffic. VoIP traffic can be detected on switch ports by using the source
MAC address of packets, or by using LLDP (IEEE 802.1AB) to discover connected
VoIP devices. When VoIP traffic is detected on a configured port, the switch
automatically assigns the port to the Voice VLAN. Alternatively, switch ports can be
manually configured.
Console#show policy-map
Policy Map rd_policy
class rd_class
set ip dscp 3
Console#show policy-map rd_policy class rd_class
Policy Map rd_policy
class rd_class
set ip dscp 3
Console#
Console#show policy-map interface ethernet 1/5
Service-policy rd_policy input
Console#
Table 4-74 Voice VLAN Commands
Command Function Mode Page
voice vlan Defines the Voice VLAN ID GC 4-270
voice vlan aging Configures the aging time for Voice VLAN ports GC 4-271
voice vlan mac-address Configures VoIP device MAC adresses GC 4-271
switchport voice vlan Sets the Voice VLAN port mode IC 4-272
switchport voice vlan rule Sets the automatic VoIP traffic detection method for ports IC 4-273

Digisol DG-FS4526 Specifications

General

Brand	Digisol
Model	DG-FS4526
Category	Switch
Language	English