Digisol DG-FS4526 - Aaa Group Server; Server

DG-FS4526 User Manual
4-89
4
www.digisol.com
aaa group server
Use this command to name a group of security server hosts. To remove a server
group from the configuration list, enter the no form of this command.
Syntax
[no] aaa group server {radius | tacacs+} group-name
• radius - Defines a RADIUS server group.
• tacacs+ - Defines a TACACS+ server group.
• group-name - A text string that names a security server group.
(Range: 1-7 characters)
Default Setting
None
Command Mode
Global Configuration
Example
server
This command adds a security server to an AAA server group. Use the no form to
remove the associated server from the group.
Syntax
[no] server {index | ip-address}
• index - Specifies the server index. (Range: RADIUS 1-5, TACACS+ 1)
• ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must
already be defined by the radius-server host command (see page 4-81).
• When specifying the index for a TACACS+ server, that server index must
already be defined by the tacacs-server host command (see page 4-85).
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#