Digisol DG-FS4526 - Show Tacacs-Server; Tacacs-Server Retransmit; Tacacs-Server Timeout

DG-FS4526 User Manual
4-87
4
www.digisol.com
tacacs-server retransmit
This command sets the number of retries. Use the no form to restore the default.
Syntax
tacacs-server retransmit number_of_retries
no tacacs-server retransmit
number_of_retries - Number of times the switch will try to authenticate
logon access via the TACACS+ server. (Range: 1-30)
Default Setting
2
Command Mode
Global Configuration
Example
tacacs-server timeout
This command sets the interval between transmitting authentication requests to the
TACACS+ server. Use the no form to restore the default.
Syntax
tacacs-server timeout number_of_seconds
no tacacs-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-540)
Default Setting
5 seconds
Command Mode
Global Configuration
Example
show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#tacacs-server retransmit 5
Console(config)#
Console(config)#tacacs-server timeout 10
Console(config)#