Digisol DG-FS4526 User Manual

DG-FS4526 User Manual
4-179
4
www.digisol.com
lldp reinit-delay Configures the delay before attempting to re-initialize after
LLDP ports are disabled or the link goes down
GC 4-183
lldp tx-delay Configures a delay between the successive transmission of
advertisements initiated by a change in local LLDP MIB
variables
GC 4-183
lldp admin-status Enables LLDP transmit, receive, or transmit and receive
mode on the specified port
IC 4-184
lldp notification Enables the transmission of SNMP trap notifications about
LLDP changes
IC 4-184
lldp mednotification Enables the transmission of SNMP trap notifications about
LLDP-MED changes
IC 4-185
lldp basic-tlv
management-ip-address
Configures an LLDP-enabled port to advertise the
management address for this device
IC 4-186
lldp basic-tlv
port-description
Configures an LLDP-enabled port to advertise its port
description
IC 4-186
lldp basic-tlv
system-capabilities
Configures an LLDP-enabled port to advertise its system
capabilities
IC 4-187
lldp basic-tlv
system-description
Configures an LLDP-enabled port to advertise the system
description
IC 4-187
lldp basic-tlv
system-name
Configures an LLDP-enabled port to advertise its system
name
IC
4-188
lldp dot1-tlv
proto-ident
Configures an LLDP-enabled port to advertise the supported
protocols
IC 4-188
lldp dot1-tlv
proto-vid
Configures an LLDP-enabled port to advertise port related
VLAN information
IC 4-189
lldp dot1-tlv
pvid
Configures an LLDP-enabled port to advertise its default
VLAN ID
IC 4-189
lldp dot1-tlv
vlan-name
Configures an LLDP-enabled port to advertise its VLAN
name
IC 4-190
lldp dot3-tlv
link-agg
Configures an LLDP-enabled port to advertise its link
aggregation capabilities
IC 4-190
lldp dot3-tlv
mac-phy
Configures an LLDP-enabled port to advertise its MAC and
physical layer specifications
IC 4-191
lldp dot3-tlv
max-frame
Configures an LLDP-enabled port to advertise its maximum
frame size
IC 4-191
lldp dot3-tlv
poe
Configures an LLDP-enabled port to advertise its
Power-over-Ethernet capabilities
IC 4-192
lldp medtlv
extpoe
Configures an LLDP-MED-enabled port to advertise its
extended Pover over Ethernet configuration and usage
information
IC 4-192
lldp medtlv
inventory
Configures an LLDP-MED-enabled port to advertise its
inventory identification details
IC 4-193
lldp medtlv
location
Configures an LLDP-MED-enabled port to advertise its
location identification details
IC 4-193
Table 4-56 LLDP Commands (Continued)
Command Function Mode Page

Digisol DG-FS4526 Specifications

General

Brand	Digisol
Model	DG-FS4526
Category	Switch
Language	English