Command Line Interface
4-116
4
www.digisol.com
web-auth login-attempts
This command defines the limit for failed web authentication login attempts. After the
limit is reached, the switch refuses further login attempts until the quiet time expires.
Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
count - The limit of allowed failed login attempts. (Range: 1-3)
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the
failed login attempts limit, before it may attempt web authentication again. Use the
no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
web-auth re-authenticate (IP) Ends the web authentication session associated with the
designated IP and forces the user to re-authenticate
PE 4-119
show web-auth
summary
Displays a summary of web authentication port
parameters and statistics
PE 4-119
Console(config)#web-auth login-attempts 2
Console(config)#
Table 4-36 Web Authentication (Continued)
Command Function Mode Page
To Next Page
Loading...
Need help?
General
