Digisol DG-FS4526 - Page 53

DG-FS4526 User Manual
3-7
3
www.digisol.com
Rate Limit 3-116
Input Port Configuration Sets the input rate limit for each port 3-116
Output Port Configuration Sets the output rate limit for ports 3-116
Port Statistics Lists Ethernet and RMON port statistics 3-117
Address Table 3-122
Static Addresses Displays entries for interface, address or VLAN 3-122
Dynamic Addresses Displays or edits static entries in the Address Table 3-123
Address Aging Sets timeout for dynamically learned entries 3-125
Spanning Tree 3-125
STA 3-125
Information Displays STA values used for the bridge 3-126
Configuration Configures global bridge settings for STA and RSTP 3-129
Port Information Displays individual port settings for STA 3-132
Trunk Information Displays individual trunk settings for STA 3-132
Port Configuration Configures individual port settings for STA 3-135
Trunk Configuration Configures individual trunk settings for STA 3-135
MSTP 3-137
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-137
Port Information Displays port settings for a specified MST instance 3-139
Trunk Information Displays trunk settings for a specified MST instance 3-139
Port Configuration Configures port settings for a specified MST instance 3-141
Trunk Configuration Configures trunk settings for a specified MST instance 3-141
VLAN 3-143
802.1Q VLAN 3-143
GVRP Status Enables GVRP on the switch 3-146
802.1Q Tunnel
Configuration
Enables 802.1Q (QinQ) Tunneling 3-158
Basic Information Displays information on the VLAN type supported by this switch 3-147
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-147
Static List Used to create or remove VLAN groups 3-149
Static Table Modifies the settings for an existing VLAN 3-150
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-152
Table 3-2 Main Menu (Continued)
Menu Description Page