Eaton Rapid Link 5 - Page 104

3 Installation
3.5 Power plug
100 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
After installing the power bus outgoers (RA-C1-PLF1, RA-C2-S1-4, RARA-C4-
PB65), you can connect the Rapid Link 5 module RAMO5 to the power plug
using the assigned power adapter cables.
RA-Q4/C1-1M5 RA-Q4/C2-1M5
￫ RA-C1-PLF1 ￫ RA-C2-S1-4 ￫ RA-C4-PB65
ATTENTION
Compatibility with cables from other manufacturers cannot be
guaranteed!