Eaton Rapid Link 5 - Connections

6 RASP5 speed controller
6.3 Connections
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 137
6.3 Connections
The RASP5 speed controller is supplied ready for connection.
All connections are via plug-in connectors.
Figure 83: Connections on the RASP5
a Power supply (3 AC 400 V, N, PE) through a power adapter cable
(￫ Section 3.5, Power plug, page 97)
b Data bus for controlling RASP5 in automatic mode
c Motor connection according DESINA specification
d Sensor and fan actuators
3 AC, 400 V, N, PE
50/60 Hz
400 V
M
3
~
①
②
③
④