1 Rapid Link 5 system
1.2 Checking the delivery
14 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
1.2 Checking the delivery
RAMO5 and RASP5 devices are packaged and dispatched with care.
The devices should be shipped only in their original packaging and using a
suitable means of transportation. Please take note of the labels and instruc-
tions on the packaging, as well as of those meant for the unpacked device.
Open the packaging with adequate tools and inspect the contents immedia-
tely after receipt in order to ensure that they are complete and undamaged.
The packaging must contain the following parts:
• Motor starter (motor control unit):
• A RAMO5 device,
• Instruction leaflet IL034084ZU or IL034092ZU.
or
• Speed controller (speed control unit):
• A RASP5 device,
• Instruction leaflet IL034085ZU or IL034093ZU.
￫
Before opening the packaging go over the nameplate on the
packaging and check for whether the delivered component is
the same part no. as the one you ordered.
Figure 2: Scope of delivery (RAMO5 or RASP5 device plus instruction leaflet)
To Next Page
Loading...
