Eaton Rapid Link 5 - 6.2 Features

5 RAMO5 motor starter
5.7 Configure specialist settings
132 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
5.7.4 Quick stop and interlocked Manual mode
RAMO5-D… DOL starter
RAMO5-W… reversing starter
P1-13 Configuration
Functions of SEN I1 and
SEN I2
Restart conditions in
Manual mode
Restart conditions in Auto
mode
1 No function (as supplied) – –
2 SEN I1 and SEN I2 stop the
motor in Auto and Manual mode
Key switch reset on rising edge Command change via ASi
3 SEN I1 stops the motor in
Auto mode
– Command change via ASi
4 SEN I1 stops the motor in
Auto and Manual mode
Key-operated switch reset and
SEN I1 no longer active
on rising edge or level detection
Command change via ASi
P1-13 Configuration
Functions of SEN I1 and
SEN I2
Restart conditions in
Manual mode
Restart conditions in Auto
mode
1 No function – –
2 SEN I1 stops the motor in both
rotation directions in Auto mode
– Command change via ASi
3 SEN I1 stops the motor in the
FWD direction in Auto mode
– Command change via ASi
SEN I2 stops the motor in the
REV direction in Auto mode
4 SEN I1 stops the motor in the
FWD direction in Auto and
Manual mode
REV: Change direction of rota-
tion to FWD for edge or level
control
Command change via ASi
FWD: from REV and loss of
SEN I1
FWD: Key switch reset and
SEN I1 no longer active for
edge control or level control
SEN I2 stops the motor in the
REV direction in Auto and
Manual mode
FWD: Change direction of rota-
tion to REV for edge or level
control
REV: from FWD and loss of
SEN I2 for edge control or level
control
REV: Key switch reset and
SEN I2 no longer active for
edge control or level control