Eaton Rapid Link 5 - 5 RAMO5 motor starter

4 Operation
4.2 Operational warnings
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 117
4.2.1 Specific hazard warnings for RASP5
.
Figure 72: Connections in the RASP5 power section and hazard warnings
a Power plug
b Motor feeder socket
c Hazard warning (discharge time of internal DC-Link capacitors)
d Hazard warning (heat sink overtemperature)

DANGER
For RASP5, The components and connections in the power
section (power plug, motor socket) remain energized up to
5 minutes after the supply voltage has been switched off
(internal DC-Link capacitor discharging time).

DANGER
High temperatures may occur on the heat sink of the RASP5
during operation.
④
①
③
②
DANGER
5 MIN
Pay attention to hazard war-
nings!
ACHTUNG Hohe Temperatur
Kühlkörper nicht berühren
WARNING HOT SURFACE
Do not touch the heat sink
Heat sink
Do not touch!