Eaton Rapid Link 5 - Configure Specialist Settings; Commissioning

5 RAMO5 motor starter
5.7 Configure specialist settings
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 129
5.7 Configure specialist settings
5.7.1 Commissioning
Before commissioning the RAMO5 motor starter, the functions must be
adjusted using parameters. The screw plug must be opened to adjust the
parameters.
Figure 79: RJ 45 interface
The parameterization can be via :
• drivesConnect software
• Keypad
• drivesConnect mobile app
①
230 / 400 V ∆ / 
4.6 / 2.6
1.1
0.81
ϕ
cos
kW
min
-1
1430 50 Hz
A
M
3 ~
400/480 V AC
ATTENTION
The RJ45 interface is not designed for Ethernet communication.