Eaton Rapid Link 5 - 8 Parameter List; Parameter Groups

8 Parameter list
8.1 Parameter Groups
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 165
8 Parameter list
8.1 Parameter Groups
The functions of the RAMO5 and RASP5 Rapid Link 5 modules are configu-
red using parameters that are divided into 8 groups (P0 to P7):
Table 34: Parameter Groups
Default setting
By default (= unit as supplied), only parameter group 1 (“Basic”) will be
accessible.
Extended parameter set
Level 2 (menu P0 to menu P7) can be accessed by entering a password in
parameter P1-14.
The default passwords are:
• Access to level 2: 101
Users can change this password as required:
• Password for level 2: with parameter P2-32
Parameter
group
Subject RAMO5 RASP5
P0 Monitor ✓ ✓
P1 Basic ✓ ✓
P2 Advanced Functions ✓ ✓
P3
Mechanical brake and digital inputs ✓ ✓
P4 Brake chopper and DC brake – ✓
P5 Communication ✓ ✓
P6 Advanced motor control ✓ ✓
P7 Motor – ✓
￫
The graphic of the following page (Menu structure) shows how
to switch between the parameter groups.