2 Engineering
2.1 Rapid Link 5 modules
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 35
2 Engineering
2.1 Rapid Link 5 modules
The Rapid Link 5 devices RAMO5 and RASP5 are installed in the direct
vicinity of the motors. Their versions and mounting depend on the required
specifications and the local conditions.
They can be connected to the power and data bus at any point without
having to interrupt the bus.
The example below provides a simplified overview using RAMO5.
Figure 8: Example showing how to use a RAMO5 unit
a Sensor (light barriers)
b RAMO5
c Motor connection cable
d Mains connection on power bus
e AS-Interface
To Next Page
Loading...
