Eaton Rapid Link 5 - 9 Communication; AS-Interface; As-I Led

9 Communication
9.1 A S - In t er fa ce
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 193
9 Communication
9.1 AS-Interface
The ASi data bus (AS-Interface) is a system solution that makes it possible to
network various assemblies. AS-Interface networks are quick and easy to set
up and put into operation.
Figure 103: M12 connection AS-I
9.1.1 AS-I LED
The AS-I LED indicates the operating states and allows problems to be
quickly diagnosed.
Table 48: Status of the AS-I LED
SEN I1/I3
PWR FLT
I1
SEN I2/I4
I2
I3
I4
STO
FAN
AS-I
Data
Fault
1 AS-Interface+
2–
3 AS-Interface–
4–
2
4
1
3
LED State Description
Data
Off ASi electronics have no supply voltage:
Check ASi connection cables
Check ASi power supply unit (head-end controller)
Green Communication active, normal operation
Red No communication:
• Head-end controller (master) in STOP mode.
• RAMO5 not entered or entered with the wrong address (ID).
• RAMO5 in Reset mode.
Yellow flas-
hing, red
ASi address = 0
￫ Adjust ASi address
Green,
Red flashing
fatal peripheral error, internal ASi error
Fault
Red No data exchange, communication error
Red flashing Peripheral fault,