Eaton Rapid Link 5 - 7.3 Configure parameters using an app

7 Parameterization
7.2 Parameterization using OLED operating unit
160 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
7.2 Parameterization using OLED operating unit
The parameters of the Rapid Link 5 system can be configured and its opera-
tion monitored using the DX-KEY-OLED operating unit.
The figure below shows the DX-KEY-OLED operating unit.
Figure 101: DX-KEY-OLED operating unit view
Display
Buttons
￫
The DX-KEY-OLED operating unit has a multi-language plain text
display unit (OLED = organic LED display).
￫
Activate language selection using the key combination
START +
.
Display: Select Language.
Change the display language using the
 and  arrow keys.
The selected language setting can then be saved by pressing
the OK button.
￫
More information and technical data on the DX-KEY-LED opera-
ting unit can be found in the instruction leaflet IL04012020Z.