0 About this manual
0.4 Abbreviations and symbols
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 9
0.4 Abbreviations and symbols
The following
symbols and abbreviations
are used in this manual:
￫
All the specifications in this manual refer to the hardware and
software versions documented in it.
￫
For more information on the series described in this manual,
please visit the
Download Center on the Eaton website.
Enter a search string in the Quick Search field and click on
Search.
Alternatively, you can use the selection lists and entries to
Switch, protect and drive motors
Rapid Link and click on
Search to find the information available on the Rapid Link topic
(assembly instructions, software, manuals, catalogs, product
information).
DS Default setting
EMC Electromagnetic compatibility
FWD Forward (clockwise rotating field)
LCD Liquid crystal display
PES
Functional ground, PE connection (ground) of the Screen (cable)
pk Peak
Par No. Parameter Number
RAMO Rapid Link Motor Starter
RASP Rapid Link Speed Control
REV Reverse (counterclockwise rotating field)
STO Safe Torque Off
The AS-Interface logo (actuator-sensor interface) indicates components that comply with
the EN 50295 and IEC 6026-2 standards.
The DESINA logo ((DEcentralized and standardized INstAllation technology) identifies the
components that correspond to the DESINA specification.
￫
Note on spelling
The short descriptions RAMO5 and RASP5 are abbreviated for
all types RAMO5-…-…S1 or RASP5-…-…S1 according to the
type code on pages 17 and 18.
To Next Page
Loading...
