Eaton Rapid Link 5 - Parameter Group 6 (Extended Motor Control)

8 Parameter list
8.3 Parameter groups for RAMO5
174 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
8.3.6 Parameter group 6 (Extended motor control)
Table 39: Parameter group 6 (Extended motor control)
Parameter Designation Description Unit Min Max DS
P6-05 Action@Underload Motor Device reaction after occuring of “Underload Motor”.
Possibilities device dependent
0: deactivated
1: Trip (stop)
– 0 1 0
P6-08 Change Phasesequence
Motor
Changes the sequence of the output phases.
This prevents two phases of the motor cable having to be changed
in case the motor runs in the wrong direction.
0: U–V–W (clockwise rotating field)
1: U–W–V (counterclockwise rotating field)
Note:
Only for RASP5… and RAMO5-W…
– 0 1 0