Eaton Rapid Link 5 - Configure Parameters Using an App

7 Parameterization
7.3 Configure parameters using an app
164 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
7.3 Configure parameters using an app
Figure 102: Configure parameters using an app
A change of the parameter values requires a connection with the RJ45
socket. This is provided under the front locking screw.
￫
The parameters can be displayed using Bluetooth (DX-COM-
STICK-KIT), for example.
The components listed here are not included as standard
(optional accessories).
￫
For more information on configuring parameters using the app,
please visit the Eaton Download Center.
www.eaton.eu → Customer Support → Download Center
- Documentation
Enter the search string AP040189 in the Quick search field and
click on Search.