Eaton Rapid Link 5 - Page 17

1 Rapid Link 5 system
1.1 System overview
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 13
Function modules:
a RAMO5 motor starter (motor control unit):
Three-phase, electronic DOL starter or reversing starter
b RASP5 speed controller (speed control unit):
3-phase, frequency-controlled motor starter
Power bus:
c Energy supply (3 AC N/PE 400 /480 V AC, 50/60 Hz)
d Power supply for ribbon cable
e Ribbon cable for 400/ 480 V AC
f Ribbon cable end piece
g Ribbon cable outlet
h Power adapter cable to ribbon cable junction
i Round cable for 400 /480 V AC
j Plug-in link for round cable
k Power adapter cable for pluggable round cable junction
l Plug-in link for round cable (Powerbox)
m Power adapter cable (round cable) to power box
Data bus:
n AS-Interface
o AS-Interface-flat band conductor
p Link for M12 connector cables
q Extension cable with M12 plug
Motor connection:
r Unscreened motor cable (for RAMO5)
s Screened motor cable (for RASP5)
t Sensor connection via M12 plug connector
u Actuator connection via M12 connector (for RAMO5)
v STO connector (for RASP5)
w DX-KEY-OLED operating unit view
x DX-COM-STICK3-KIT Bluetooth stick