4 Operation
4.3 Manual control
120 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
On RAMO5-W… (reversing switch) and RASP5 (speed controller)
Rapid Link 5 modules, the required rotating field direction can be selected
when the selector switch is in Manual mode:
• FWD = Forward. Clockwise rotating field enable
(L1
→ U, L2 → V, L3 → W)
• REV = Reverse. Anticlockwise rotating field enable
(L1
→ W, L2 → V, L3 → U)
Figure 74: Direction of rotating field
The selected and enabled rotating field direction is indicated by the green
FWD and REV LEDs. The selector switch for the rotating field direction has
three positions.
When the switch is in the OFF position, the Rapid Link 5 modules are locked
in Manual mode.
￫
The selector switch for the direction of rotating field maintained
in all positions.
To Next Page
Loading...
