Eaton Rapid Link 5 - Page 143

6 RASP5 speed controller
6.4 Specific technical data
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 139
DC braking I/I
e
% ≦ 100, adjustable ≦ 100, adjustable ≦ 100, adjustable ≦ 100, adjustable
Rated voltage for brake control U V AC RASP5-xx1… (180 V DC)
RASP5-xx2… (230/277 V AC)
RASP5-xx4… (400/480 V AC)
Switching frequency f
PWM
kHz 8 (adjustable 4–32)
V/f characteristic Linear Linear Linear Linear
Heat dissipation at rated current
(I
e
) and switching frequency
(f
PWM
) of 6 kHz
P
v
W 32 46 58 95
Heat dissipation at idle
(standby) with AS-Interface
supply voltage
P
v
W < 9 < 9 < 9 < 12
Efficiency η
0.97 0.98 0.98 0.98
Fan
internal temperature controlled
Device fans on heat sink – – – Fan
Output frequency f
z
Hz 50/60 Hz, adjustable 0 - 320 Hz
1. Fixed frequency (P1-12) f
z
Hz 30 30 30 30
2. Fixed frequency (P2-01) f
z
Hz 40 40 40 40
3. Fixed frequency (P2-02) f
z
Hz 50 50 50 50
4. Fixed frequency (P2-03) f
z
Hz 50 50 50 50
Response time with default settings
Motor On (automatic)
1)
t
ON
ms < 10 < 10 < 10 < 10
Motor Off (automatic)
1)
t
OFF
ms < 10 < 10 < 10 < 10
Motor Off (quick stop) t
OFF
ms < 10 < 10 < 10 < 10
Minimum pulse duration I3/I4 t
ON
ms 5 5 5 5
longest permissible length of
motor cable
(EMC, 2nd environment, C3)
lm25 25 25 25
Weight
(Without/with repair switch)
mkg3.4/3.7 3.4/3.7 3.4/3.7 3.4/3.8
1) without bus runtime, depending on PLC.
Symbol Unit RASP5-2… RASP5-4… RASP5-5… RASP5-8…