1 Rapid Link 5 system
1.3 Rating data on the nameplate
16 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
The inscription on the name plate has the following meaning (example):
Inscription Meaning
RASP5-2402A31-5120100S1 Type designation:
RASP5 = RASP5 speed controller
2 = 2.4 A rated operational current
4 = 4 Sensor inputs
0 = no actuator output
2 = 230 V AC control voltage for external motor brakes
A = AS-Interface communication
31 = AS-Interface profile S7.4
5 = Energy connector HAN Q5
1 = 1 power connector
2 = Bottom power port location
0 = no repair switch
1 = with brake resistor
0 = without STO
0 = without fan
S1 = Version
Input
Rated operational data of mains connection
Three-phase AC voltage (U
e
3~ AC)
Voltage 380 - 480 V, frequency 50/60 Hz, input phase current 3.5 A (pk)
Output
Load side (motor) rated operational data:
Three-phase AC voltage (0 - 500 V), output phase current (2.4 A),
Output frequency (0 - 500 Hz)
Assigned motor output:
0.75 kW at 400 V/1 HP with 460 V for a four-pole, internally cooled or surface-
cooled three-phase motor (1500 rpm at 50 Hz/1800 rpm at 60 Hz)
Serial No.:
Serial number
IP65 / NEMA 12 Housing protection type: IP65 (NEMA 12), UL (cUL) open type
Software Software version (1.00)
29082019 Manufacturing date: (in this case, for example: 8/29/2019)
Max. Amb. 40 °C Maximum permissible ambient air temperature (40 °C)
The speed controller is a piece of electrical equipment.
Read the manual (in this case MN034004EN) before making any electrical
connections and commissioning.
To Next Page
Loading...
