Eaton Rapid Link 5 - Page 44

2 Engineering
2.2 Connections
40 Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
③ Warning: “Dangerous voltage” – only for RASP5
④ Warning: “High temperature” – only for RASP5

WARNING
Dangerous voltage from internal DC-Link capacitors (observe
discharge time)
Dangerous voltage from internal DC-Link capacitors (observe
discharge time)
Pay attention to hazard warnings!

CAUTION
High heat sink temperature.
Do not touch!
￫
For detailed information about the connectors, see chapters
 Section 3.5, Power plug, page 97 and  Section 3.6, Motor
feeder, page 105
DANGER
5 MIN
ACHTUNG Hohe Temperatur
Kühlkörper nicht berühren
WARNING HOT SURFACE
Do not touch the heat sink