C
HAPTER
9
| Maintenance Settings
Upgrading Firmware
– 100 –
◆ Remote — Downloads an operation code image file from a specified
remote FTP or TFTP server. After filling in the following fields, click Start
Upgrade to proceed.
■
New Firmware File: Specifies the name of the code file on the
server. The new firmware file name should not contain slashes (\ or
/), the leading letter of the file name should not be a period (.), and
the maximum length for file names on the FTP/TFTP server is 255
characters or 32 characters for files on the access point. (Valid
characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
■
IP Address: IP address or host name of FTP or TFTP server.
■
Username: The user ID used for login on an FTP server.
■
Password: The password used for login on an FTP server.
◆ Start Upgrade — Commences the upgrade process.
To Next Page
Loading...
Need help?
General
