C
HAPTER
4
| Initial Configuration
Quick Start
– 43 –
◆ Logout – Ends the web management session.
◆ Save Config – Saves the current configuration so that it is retained
after a restart.
QUICK START
The Quick Start menu is designed to help you configure the basic settings
required to get the access point up and running. Click ‘System’, followed by
‘Quick Start’.
STEP 1 The first page of the Quick Start configures the system identification,
access password, and the Country Code.
Figure 16: Quick Start - Step 1
The following items are displayed on the first page of the Quick Start
wizard:
IDENTIFICATION
◆ System Name — The name assigned to the access point.
(Default: 11n_AP)
CHANGE PASSWORD
◆ Username — The name of the user is fixed as “admin” and is not
configurable.
To Next Page
Loading...
Need help?
General
