Edge-Core EAP8518 - Wireless Interface Commands

C HAPTER 26 | Wireless Interface Commands
– 210 –
EXAMPLE
AP# show interface wireless 0 vap 0
----------------------------------Basic Setting----------------------------
SSID : Edgecore_VAP_0
Interface Radio Mode : 11ng
Auto Channel Select : DISABLE
Channel : 11
High Throughput Mode : HT20
Status : ENABLE
VLAN-ID : 1
Dhcp-Relay Server Ip : 0.0.0.0
------------------------------------Capacity-------------------------------
Maximum Association Client Number : 64 Clients
--------------------------------802.11 Parameters--------------------------
Transmit Power : min(3 dBm)
Fragmentation Threshold : 2346
RTS Threshold : 2347
Beacon Interval : 100
Authentication Timeout INTERVAL : 3 Mins
Association Timeout Interval : 5 Mins
DTIM Interval : 1
Short Guard Interval Status : Enabled
A-MPDU Status : Enabled
A-MPDU Length Limit : 65535 Bytes
A-MSDU Status : Enabled
A-MSDU Length Limit : 4096 Bytes
------------------------------------Security-------------------------------
Closed System : DISABLE
WPA Function : OPEN-SYSTEM, WPA FUNCTION DISABLE
WPA PSK Key Type : ascii
WPA PSK Key : 12345678
-----------------------Press any key to continue-----------------------
Default Transmit Key : 1
Static WEP Keys
Key 1 : 12345
Key 2 : 12345
Key 3 : 12345
Key 4 : 12345
Pre-Authentication : DISABLE
-------------------------------------802.1x--------------------------------
802.1x : DISABLE
802.1x Session Timeout Value : 3600 min
--------------------------------Quality of Service-------------------------
WMM Mode : DISABLE
WMM Acknowledge Policy
AC0(Best Effort) : NO-Acknowledge
AC1(Background) : NO-Acknowledge
AC2(Video) : NO-Acknowledge
AC3(Voice) : NO-Acknowledge
AP#