Edge-Core EAP8518 - Figure 26: Remote Management

C HAPTER 6 | Management Settings
Remote Management Settings
– 61 –
◆ The client and server generate session keys for encrypting and
decrypting data.
◆ The client and server establish a secure encrypted connection.
◆ A padlock icon should appear in the status bar for Internet Explorer.
Figure 26: Remote Management
The following items are displayed on Admin Interface page:
◆ Telnet Access — Enables/disables management access from Telnet
interfaces. (Default: enabled)
◆ Telnet Access Port — Sets the specified Telnet port for
communication. (Default: 23)
◆ SSH Server — Enables/disables management access from SSH
Servers. (Default: enabled)
◆ SSH Server Port — Sets the specified SSH Server port for
communication. (Default: 22)
◆ HTTP Access — Enables/disables management access from any IP
address. (Default: enabled)
◆ HTTP Timeout — Specifies the time after which the HTTP connection
will be lost with a period of inactivity. (Default: 1800 seconds; Range:
1-1800 seconds; 0=disabled)
◆ HTTP Port — Specifies the HTTP port for IP connectivity. (Default: 80;
Range 1024-65535)