C
HAPTER
6
| Management Settings
Access Limitation
– 62 –
◆ HTTPS Server — Enables/disables management access from a HTTPS
server. (Default: enabled)
◆ HTTPS Port — Specifies the HTTPS port for secure IP connectivity.
(Default: 443; Range 1024-65535)
◆ SNMP Access — Enables/disables management access from SNMP
interfaces. (Default: enabled)
ACCESS LIMITATION
The Access Limitation page limits management access to the access point
from specified IP addresses or wireless clients.
Figure 27: Access Limitation
The following items are displayed on the Access Limitation page:
IP MANAGEMENT CONTROL
◆ Any IP — Indicates that any IP address is allowed management
access.
◆ Single IP — Specifies a single IP address that is allowed management
access.
◆ Multiple IP — Specifies an address range as defined by the entered IP
address and subnet mask. For example, IP address 192.168.1.6 and
subnet mask 255.255.255.0, defines all IP addresses from 192.168.1.1
to 192.168.1.254.
◆ IP Address — Specifies the IP address.
To Next Page
Loading...
Need help?
General
