C
HAPTER
14
| System Logging Commands
– 137 –
logging level This command sets the minimum severity level for event logging.
SYNTAX
logging level <Emergency | Alert | Critical | Error | Warning |
Notice | Informational | Debug>
DEFAULT SETTING
Informational
COMMAND MODE
Global Configuration
COMMAND USAGE
Messages sent include the selected level down to Emergency level.
EXAMPLE
AP(config)#logging level alert
AP(config)#
logging clear This command clears all log messages stored in the access point’s memory.
SYNTAX
logging clear
COMMAND MODE
Global Configuration
EXAMPLE
AP(config)#logging clear
AP(config)#
Table 11: Logging Levels
Level Argument Description
Emergency System unusable
Alert Immediate action needed
Critical Critical conditions (e.g., memory allocation, or free memory
error - resource exhausted)
Error Error conditions (e.g., invalid input, default used)
Warning Warning conditions (e.g., return false, unexpected return)
Notice Normal but significant condition, such as cold start
Informational Informational messages only
Debug Debugging messages
To Next Page
Loading...
Need help?
General
