Edge-Core EAP8518 User Manual

C HAPTER 15 | System Clock Commands
– 140 –
EXAMPLE
AP(config)#sntp-server ip 1 10.1.0.19
AP#
RELATED COMMANDS
sntp-server enabled
show sntp
sntp-server enabled This command enables SNTP client requests for time synchronization with
NTP or SNTP time servers specified by the sntp-server ip command. Use
the no form to disable SNTP client requests.
SYNTAX
[no] sntp-server enabled
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
COMMAND USAGE
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the access point only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
EXAMPLE
AP(config)#sntp-server enabled
AP(config)#
RELATED COMMANDS
sntp-server ip
show sntp
sntp-server date-
time
This command sets the system clock.
SYNTAX
sntp-server <year> <month> <day> <hour> <minute>
year - Sets the year. (Range: 1970-2100)
month - Sets the month. (Range: 1-12)
day - Sets the day. (Range: 1-31)
hour - Sets the hour. (Range: 0-23)

Edge-Core EAP8518 Specifications

General

Brand	Edge-Core
Model	EAP8518
Category	Wireless Access Point
Language	English