Edge-Core EAP8518 - Page 158

C HAPTER 17 | SNMP Commands
– 158 –
systemUp: Disabled systemDown: Disabled
==========================================================================
AP#
show snmp vacm
view
This command displays the configured SNMP v3 views.
SYNTAX
show snmp vacm view [view-name]
view-name - The name of a user-defined SNMPv3 view.
COMMAND MODE
Exec
EXAMPLE
AP# sh snmp vacm view
View List:
==================================
View Name : defaultview
Type : included
OID : .1
Mask :
View Name : testview
Type : included
OID : .1
Mask :
Type : excluded
OID : .13.6.1.2.1.2.2.1.2.1.1
Mask :
==================================
AP#
show snmp vacm
group
This command displays the configured SNMP v3 groups.
SYNTAX
show snmp vacm group [group-name]
group-name - The name of a user-defined SNMPv3 group.
COMMAND MODE
Exec
EXAMPLE
AP# sh snmp vacm group
Group List: