C
HAPTER
24
| WDS Bridge Commands
– 192 –
DEFAULT SETTING
None
COMMAND MODE
Interface Configuration (Wireless) VAP
COMMAND USAGE
In WDS-STA mode, the VAP operates as a client station in WDS mode,
which connects to an access point in WDS-AP mode. The user needs to
specify the SSID and MAC address of the VAP to which it intends to
connect.
EXAMPLE
AP(if-wireless 0 [VAP 0])#wds sta ap-ssid red address 00-11-22-33-44-55
AP(if-wireless 0 [VAP 0])#
show wds wireless This command displays the current WDS settings for VAPs.
SYNTAX
show wds wireless <index> vap {all | <vap-index>}
index -The wireless interface index number. (Option: 0)
vap-index - The VAP index number. (Range: 0-7)
COMMAND MODE
Exec
EXAMPLE
AP# show wds wireless 0 vap 0
WDS Status(wireless 0 vap 0)
==========================================
Status: up
Mode: STA
AP SSID: red
AP MAC: 00:11:22:33:44:55
==========================================
AP#
To Next Page
Loading...
Need help?
General
