Edge-Core ECS4120 Series

Chapter 4 | System Management Commands
System Status
– 110 –
IML_RX 0.00 0.00 0.00
IML_TX 0.00 0.00 0.00
KEYGEN_TD 0.00 0.00 0.00
L2_L4_PROCESS 0.00 0.00 0.00
L2MCAST_GROUP 0.00 0.00 0.00
L2MUX_GROUP 0.00 0.00 0.00
L4_GROUP 0.00 0.00 0.00
LACP_GROUP 0.00 0.00 0.00
MSL_TD 0.00 0.00 0.00
NETACCESS_GROUP 0.00 0.00 0.00
NETACCESS_HASH2 0.00 0.08 1.00
NETACCESS_NMTR 1.00 0.16 1.00
NETCFG_GROUP 0.00 0.00 0.00
NETCFG_PROC 0.00 0.00 0.00
NIC 0.00 0.00 0.00
NMTRDRV 0.00 0.33 1.00
POE_TASK 0.00 0.00 0.00
PORT_SEC 0.00 0.00 0.00
PPPOE_IA_GROUP 0.00 0.00 0.00
SFLOW_TD 0.00 0.00 0.00
SNMP_GROUP 0.00 0.00 0.00
SNMP_TD 0.00 0.00 0.00
SNTP_TD 0.00 0.00 0.00
SSH_TD 0.00 0.00 0.00
STA_GROUP 0.00 0.00 0.00
STKCTRL_GROUP 0.00 0.00 0.00
STKTPLG_GROUP 0.00 0.00 0.00
SWCTRL_GROUP 0.00 0.00 0.00
SWCTRL_TD 0.00 0.00 0.00
SWDRV_MONITOR 0.00 0.00 0.00
SYS_MGMT_PROC 0.00 0.00 0.00
SYSDRV 0.00 0.00 0.00
SYSMGMT_GROUP 0.00 0.00 0.00
SYSTEM 0.00 0.58 1.00
TELNET_GROUP 0.00 0.00 0.00
UDLD_GROUP 0.00 0.00 0.00
WTDOG_PROC 0.00 0.00 0.00
XFER_TD 0.00 0.00 0.00
Console#
show running-config This command displays the configuration information currently in use.
Syntax
show running-config [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)